AGRICORE MACHINERY · 25–180 HP machinery · global supply芯农机械 · 25–180 马力机械 · 全球供应agricorechina@gmail.com  ·  WhatsApp +86 13012621092
Home首页/Insights新闻洞察/Product Focus新品解析
Product Focus新品解析 · 2026.06.12

Front Dig · Rear Till: One Crawler Chassis for Earthmoving and Tillage

前挖后旋:一套履带底盘,怎么同时干好土方与耕整

Published 2026.06.12发布于 2026.06.12By AGRICORE Engineering Team作者 芯农工程团队Reading ~4 min阅读 约 4 分钟

How a 360° slew bucket, front dozer blade and rear rotary-tiller hitch share one crawler chassis — plus typical set-ups for orchards, ditches and site levelling.

360° 回转挖臂、前置推土铲与后置旋耕接口如何共用一套履带底盘,以及果园、沟渠与场地平整的典型配置。

Front Dig · Rear Till: One Crawler Chassis for Earthmoving and Tillage

In this article

Front dig, rear till is how we name this one-machine, two-job platform: a 360° slewing bucket up front, a rotary tiller standard at the rear. The 'rotary' in the name is the bucket's full 360° slew — dig, swing and dump without repositioning the chassis. That is fundamentally different from a rear backhoe limited to roughly 200° of swing. In orchard rows, ditches and tight sites, every repositioning you avoid is real productivity.

Take the 25/35 HP front-dig rear-till amphibious crawler: 4060 × 1060 × 1260 mm at 1.3 t, a 25/35 HP single-cylinder water-cooled engine (Changzhou Yangma) on 180 × 72 × 46 tracks, 60 cm ground clearance, 2 m digging depth and 2.3 m lift height. The rotary tiller offers 1–1.2 m width, 350 r/min rotor speed and 20–30 cm depth, working 3–5 mu/h on just 1 L/h of fuel. The dryland version is more compact (3300 × 900 × 1100 mm, 1.1 t) for orchards, greenhouses and hilly dryland.

Attachments define what the machine can actually do. A 1 m rotary tiller, digging bucket and dozer blade are standard; weeding wheels, bed formers, trenching rippers, backfillers, straw-returning tools, grapples, breakers, rakes and harvesters cover common earthmoving and agronomy jobs. List the jobs you genuinely need across a year, then build the attachment list — that is more useful than comparing bucket volume or horsepower alone.

本文要点

「前挖后旋」是我们对这台一体化机型的宣传叫法:前端 360° 全回转挖斗负责开挖,尾部标配旋耕机,挖完沟直接下田旋耕。「转盘」指的是挖斗可 360° 全回转——机身不用挪,挖、转、卸一气呵成;这与只能在约 200° 范围内摆动的后挖臂有本质区别。在果园行间、沟渠和狭窄场地,少挪一次车就是实打实的效率。

以 25/35 前挖后旋水旱两用履带机为例:整机 4060×1060×1260mm、1.3 吨,配 25/35 马力单缸水冷发动机(常州洋马)与 180×72×46 履带,底盘离地 60cm、挖掘深度 2 米、举高 2.3 米;旋耕幅宽 1–1.2 米可选、转速 350 转/分、耕深 20–30cm,作业 3–5 亩/小时、油耗仅 1 升/小时。旱地款机身更紧凑(3300×900×1100mm、1.1 吨),适合果园、大棚与丘陵旱地。

属具决定这台机器的边界。标配 1 米旋耕机、小挖斗与推土铲;除草轮、起垄器、开沟松土、回填、秸秆还田、抓木器、破碎锤、搂草耙与各种收获机覆盖常见土方与农艺工况。选型时先列出一年里真正要做的工序,再决定属具清单,比单纯比较斗容或马力更有意义。

Need help choosing the right machine?

不确定该选哪款机型?

Tell us your field size, crops and implements — our engineers will recommend a configuration within 24 hours.

告诉我们您的地块规模、作物与配套农具,工程师将在 24 小时内为您推荐配置方案。

Get a quote →获取报价 → WhatsApp

← Back to all insights← 返回全部文章